Low temperature incubator
■Low temperature incubator LP-50P LP130P LP-200P LP260P LP400P
These low temperature incubators are capable of 4 step-program control
with a high accuracy microprocessor (cooler: on-off control, heater: proportional
control). Stainless steel shelves are coated with anti-bacterial resin
to prevent bacterial contamination inside the chamber. A wide variety of
chambers are available in size ranging from 50 liters to 400 liters.
|
|
|
|
|
model LP-50P
|
model LP-130P
|
model LP-200P |
model LP-260P |
model LP-400P |
Operation Panel
■Features
- Four step-program control operation
- Automatic alarms controlled by a microprocessor, a buzzer alarm as well
as an alarm display on the operational panel (buzzer alarm is optional
in model LP-50P).
- Prompt cooling to -15ºC.
- Easy-to-use operational panel with digital display
- Cooler: on-off control, heater: proportional control
- Shelves and measurement opening are coated with anti-bacterial resin to prevent bacterial contamination.
- Option: illuminating lamp.
■Temperature precision in the chamber |
|
|
|
Temperature setting |
5.0℃ |
10.0℃ |
25.0℃ |
Highest temperature |
6.2℃ |
11.0℃ |
25.3℃ |
Lowest temperature |
2.0℃ |
6.4℃ |
22.3℃ |
Average temperature |
4.8℃ |
9.5℃ |
24.7℃ |
Deviation from the set value |
-0.2℃ |
-0.5℃ |
-0.3℃ |
# Temperature precision data are available in our technical data sheets other than the brochure.
■Applications
- Plant tissue culture, germination tests
- Breeding of Insects or small animals
- Culture of microorganisms, such as bacteria, viruses, and fungi
- BOD-testing for water quality and storage of test samples
- Biochemical experiments at low temperature, such as electrophoresis
- Quality testing of pharmaceuticals, cosmetics or foods, etc.
■Specifications
Model |
LP-50P |
LP-130P |
LP-200P |
Outer dimensions (mm) |
W483×D553×H690 |
W704×D569×H1063 |
W704×D800×H1,063 |
Inner dimensions (mm) |
W400×D335×H370 |
W620×D340×H584 |
W620×D545×H584 |
Control system |
Controlled by microprocessors with digital display, forced air circulation
system |
Temperature range |
-15~50℃(environ temperature of 20ºC without loading) |
Light source |
― |
Fluorescent lamp 15W |
Freezer |
85W |
175W |
180W |
Power requirement |
Single phase 100V
10A50/60Hz 10A |
Single phase 100V 50/60Hz 15A |
Model |
LP-260P |
LP-400P |
Outer dimensions (mm) |
W704×D569×H1,633 |
W704×D800×H1,633 |
Inner dimensions (mm) |
W620×D340×H1,154 |
W620×D545×H1,155 |
Control system |
Controlled by microprocessors with digital display, forced air circulation
system |
Temperature range |
-15~50℃(environ temperature of 20ºC without loading) |
Illumination with temperature control |
Fluorescent lamp 15W |
Freezer |
300W |
Power requirement |
Single phase 100V 50/60Hz 15A |
Nippon Medical & Chemical Instruments Co., Ltd.
Copyright(C)NKsystem,All Rights Reserved