本文へスキップ

Nippon Medical & Chemical Instruments Co., Ltd. is a manufacturer specialized for environmental control technology.

E-mail  nk.trade@nihonika.co.jp

3-9, Tamatsukuri Motomachi, Tennoji-ku, Osaka 543-0014, Japan

Mini Plant Incubator

■Dedicated device

It is the best product for tissue culture and the clone seedling production. This product can combine R, G, B LED Lamp and can make some color rendition with 3 in 1 LED lighting unit.


 
model　HCLH-1240LEDDT-F
Installed a shelf
 
model　HCLPH-1240LEDSP-F
Installed Hydrogenic culture


■Features

  • Excellent adiathermancy and sealing.
  • Each shelf equiped 3 in 1 LED unit.
  • The procudct can widely control the temperature in the range of 5 to 45℃ without any lighting.
  • The 3 in 1 LED adapts a digital dimmer, control the level of illumination: Red, Green, and Blue in the range of 0 to 100%.
  • CO2gas can be controled.
  • Easy to move with casters.
  • A power-outlet installed in the chamber.

■Applications

  • Tissue culture or clone seedling of crops, fruit trees, vegetables, flowers, mulberries, grass, etc.
  • Tissue culture or clone seedling in greenhouse horticulture or plant factory.
  • Culture of algae.　
  • Other research and development.


■Options

  • ♦Gas cylinder ♦Pressure regulator ♦Cradle for a gas cylinder ♦CO2 removal unit



■Specifications

Model HCLH-1240LEDDT-F HCLPH-1240LEDSP-F
Outer dimensions (mm) W1,350×D844×H1,980 W1,527×D844×H1,980
Inner dimensions (mm) W1,200×D703×H1,466
Capacity   1,240L
Temperature control range +5 to 40℃±1℃ *turning on the light: +15 to 40℃
Humidity control range - 60 to 80% RH ±10% (20 to 40℃)
CO2 concentration* Atmospheric concentration～4,800ppm 
 Shelf promotion shelf (3 steps) 2 steps for hydroponics
Light source  3 in 1 LED unit
2 units x 3 steps 		 3 in 1 LED unit
2 units x 2 steps 
Control system  Changingover system between constant operation and day/night switchiing operation Step program, built-in clock control (24 hours), 9 steps/3 patterns, 27 steps/1 pattern
Control method  Three-position control method: Refrigerator and humidifier, ON/OFF control; heater, proportional control
Illumination
 10,000lx *Reference value at 100mm at center positon
Photon amount
400μmolm2S-1 *Reference value at 100mm at center positon
Cooler 250W
Heater 500W
Operation current    14A
Power requirement    Single phase 100V　50/60Hz　15A

# A power-outlet in the chamber is capable of up to 1 ampere.
# It is advisable to install the chamber in a commonly-used room below 30ºC.
# The power requirement includes electric capacity of illumination lamps for growing in the chamber. If a voltage of 200-230 V will be used, advance notice is appreciated.
# Temperature sensor: platinum resistance temperature sensor, humidity sensor: capacitance measurement sensor.
# The specified performance may not be achieved depending on the combination of temperature and humidity.
# The sample may be dried in case of inside condition.
# Dew condensation may run the surface of the chamber depending on the program setting.

*Option
Gas cylnder, cradle, pressure regulator, and carbonic acid gas removing unit